Skip to content
BUILD BETTER WITH ATS
BUILD BETTER WITH ATS
hebel panels used in a building

How Hebel Panels Are Used Across a Building

hebel panels used in a building

Hebel offers a range of reinforced autoclaved aerated concrete (AAC) panels designed for different parts of residential, multi-residential and commercial construction. From external walls and intertenancy systems to upper-storey flooring and boundary fencing, each Hebel product is developed for specific building applications.

Rather than using one panel for every purpose, builders can select from specialised systems such as PowerPanelXL, PowerPanel50, PowerPattern, PowerFloor, PowerBlock and PowerFence. Understanding the differences between these products helps ensure the selected system suits the building design, structural requirements and intended application.

In this guide, we'll explore where Hebel panels are used, how the main products differ and what to consider when choosing a system for your next Australian construction project.

Where Are Hebel Panels Used in a Building?

different application areas of hebel panels

Hebel panels can be incorporated into several areas of a building. The appropriate product depends on whether the application involves external cladding, internal separation, flooring or fencing.

Contemporary rendered external facade illustrating Hebel external wall applications
EXTERNAL WALLS & FACADES
External cladding solutions for residential buildings
01

External Walls and Facades

External walls are one of the most common applications for Hebel panels. They can form part of a building's external wall system, providing a surface suitable for compatible finishes such as render, texture coatings and selected architectural treatments.


Four products commonly considered for residential external walls are PowerPanelXL, PowerPanel50, PowerPattern and PowerBlock.

Hebel PowerPanelXL – 75 mm

A 75 mm reinforced AAC panel designed for external rendered walls in houses and low-rise multi-residential buildings. It can also be specified for selected boundary and intertenancy wall applications. Its panel format and range of compatible finishes provide flexibility when designing contemporary rendered facades.

Hebel PowerPanel50 – 50 mm

A thinner, 50 mm reinforced AAC panel developed for rendered exterior cladding. Its reduced thickness can be useful where the design calls for a slimmer external wall cladding solution.

Hebel PowerPattern

PowerPattern takes low-rise cladding and high-rise facade panels beyond the rendered masonry look with the timeless vertical joint (VJ) cladding aesthetic.


Designers can choose a single groove interval that best suits the scale of their wall or facade design, or combine different groove spacings on the same wall for added architectural interest.

Hebel PowerBlock

Hebel PowerBlock the smart choice for external walls. They have three times the thermal resistance of double brick and incredible design flexibility due to their capacity to be shaped and routed for added aesthetic appeal.


Available in 200, 250, 300 and 400 mm widths and thicknesses (heights) from 50mm to 300mm.  Larger sizes are used for load bearing external walls up to three storeys. There are also block sizes for non-load bearing interior walls, bathroom hobs and spas. Along with sizes for capping, windowsills and a custom PowerBlock for decoration that is 1200mm wide.

AAC wall panels used in intertenancy and party wall systems
INTERTENANCY & PARTY WALLS Wall systems designed around separation and performance requirements
02

Intertenancy and Party Walls

Hebel panels are also used to separate internal spaces and adjoining dwellings. These applications are particularly relevant to townhouses, duplexes, apartments and other multi-residential developments.


Two products commonly considered for these applications are PowerPanelXL and PowerPanel50.

Hebel PowerPanelXL – 75 mm

PowerPanelXL can be used in selected intertenancy and party wall systems for houses and low-rise multi-residential buildings. Its 75 mm reinforced panel construction makes it an option where a solid wall system is required.

Hebel PowerPanel50 – 50 mm

PowerPanel50 provides another option for intertenancy and party walls, including selected dual zero-boundary wall systems. Its thinner 50 mm panel format allows it to be incorporated into systems designed around specific space and construction requirements.

Other PowerPanel Applications

For larger apartment and commercial developments, the broader Hebel PowerPanel range also includes tongue-and-groove and square-edge panels. These are designed for applications such as corridor walls, shaft walls, service walls, apartment facades and balcony blades.


Correct system selection is important because wall height, connections, junctions, penetrations and finishing details all contribute to the performance of the completed wall assembly.

Hebel PowerFloor AAC panels installed over supporting floor joists
FLOORS & UPPER-STOREY FLOORING
Lightweight AAC flooring panels installed over joists
03

Floors and Upper-Storey Flooring

Hebel is not limited to wall construction. The PowerFloor system uses reinforced autoclaved aerated concrete (AAC) panels as structural flooring over supporting joists.


PowerFloor is designed for applications including first floors, suspended ground floors, decks, balconies and selected wet-area flooring. Its tongue-and-groove panel design provides a continuous flooring substrate that can accommodate a range of compatible floor finishes.

Compatible Floor Finishes

Depending on the specified system and preparation requirements, PowerFloor can accommodate finishes such as ceramic floor and tiles, vinyl flooring, engineered timber and hardwood, and carpet.

Versatile Flooring Applications

Suitable for first floors, suspended ground floors, decks, balconies and selected wet-area flooring applications.

An Alternative to Conventional Flooring

Can be particularly useful in two-storey homes and multi-residential projects where builders want an alternative to conventional lightweight sheet flooring or heavier concrete floor construction.


Joist spacing, support details, panel connections and the complete floor assembly must be designed and installed in accordance with the relevant technical documentation.

Modern solid AAC boundary fence with dark steel posts beside a landscaped residential property
BOUNDARY WALLS & FENCING
Solid panel fencing for privacy and outdoor separation
04

Boundary Walls and Fencing


Hebel also offers a dedicated product for residential fencing: PowerFence. It uses 75 mm steel-reinforced AAC panels installed between steel posts with a purpose-designed bracket system. The modular arrangement creates a solid rendered fence suitable for front boundaries and side or rear fencing.


Unlike open slat fencing, a solid panel fence provides greater visual privacy. It can also help reduce unwanted noise from surrounding roads and neighbouring properties when appropriately designed.

Solid Panel Construction

75 mm steel-reinforced AAC panels are installed between steel posts using a purpose-designed bracket system to create a continuous rendered fence.

Privacy and Noise Reduction

A solid panel fence provides greater visual privacy than open slat fencing and can help reduce unwanted noise from surrounding roads and neighbouring properties when appropriately designed.

Residential and DIY Applications

Designed for homes, low-rise apartments, multi-residential developments and selected DIY fencing projects.

Footings, posts, brackets, panel installation and site conditions must follow the specified system requirements.

Understanding the Main Hebel Products


Although Hebel panels share the same fundamental AAC material, they are not interchangeable. Each product has its own dimensions, reinforcement configuration, installation requirements and intended applications.


The following comparison provides a quick overview of six products commonly considered in residential and low-rise construction.

Hebel product Panel specification Main applications
PowerPanelXL 75 mm reinforced AAC External rendered walls, selected boundary walls and intertenancy or party walls
PowerPanel50 50 mm reinforced AAC Rendered external cladding, intertenancy walls, party walls and selected dual zero-boundary walls
PowerPattern Reinforced AAC facade panels with vertical joint (VJ) profiles Low-rise external cladding and high-rise facades with a vertical joint cladding aesthetic. Supports single or varied groove spacing for customised architectural designs
PowerBlock AAC blocks available in 200, 250, 300 and 400 mm widths, with thicknesses from 50 mm to 300 mm Load-bearing external walls up to three storeys, non-load-bearing interior walls, bathroom hobs, spas, capping, windowsills and decorative features
PowerFloor 75 mm reinforced tongue-and-groove AAC First floors, suspended ground floors, decks, balconies and selected wet areas
PowerFence 75 mm reinforced AAC Residential front, side and boundary fencing

PowerPanelXL: For External Walls and Selected Wall Systems

PowerPanelXL is a 75 mm steel-reinforced AAC panel developed for houses and low-rise multi-residential construction. It is commonly used for external rendered walls and can also form part of selected boundary and intertenancy wall systems.

The panels are available in a range of lengths to suit common wall heights, helping builders plan panel layouts and reduce unnecessary cutting. A range of compatible render and coating options also allows flexibility in the finished facade appearance.

PowerPanel50: For Slimmer External Cladding and Wall Systems

PowerPanel50 is a 50 mm reinforced AAC panel designed for rendered exterior cladding. It is also used in specified intertenancy, party wall and dual zero-boundary wall systems.

Its thinner profile distinguishes it from PowerPanelXL. Rather than choosing between the products based on thickness alone, builders should consider the complete wall design, applicable system details and project performance requirements.

PowerPattern: For External Cladding and Facades

PowerPattern is a 75 mm reinforced autoclaved aerated concrete (AAC) panel system designed for distinctive architectural facades in residential, low-rise and high-rise developments. Available in PowerPattern Track and made-to-order Collections, it offers a range of decorative profiles, including V-grooves, geometric, organic and linear patterns.


The panels combine a modern, textured facade finish with the thermal insulation and acoustic performance of Hebel AAC. They can be painted, rendered or finished with premium coatings, providing architects and builders with greater design flexibility for contemporary building exteriors.

PowerBlock: For Thermally Efficient and Versatile Wall Systems


Hebel PowerBlock is an AAC block system designed for external and internal wall applications. It offers three times the thermal resistance of double brick, making it a suitable option for projects seeking improved thermal performance and greater design flexibility.


Available in 200, 250, 300 and 400 mm widths, with thicknesses (heights) ranging from 50 mm to 300 mm, PowerBlock accommodates a variety of construction requirements. Larger block sizes can be used for load-bearing external walls in buildings up to three storeys, subject to structural design requirements.

PowerFloor: For Structural Flooring

PowerFloor is a 75 mm reinforced AAC tongue-and-groove flooring panel installed over supporting joists. It is designed for residential flooring applications, including upper-storey floors, suspended ground floors, decks and balconies.

It provides a base for a range of compatible floor coverings, including tiles, timber, vinyl and carpet. The supporting structure and finished floor assembly must be designed for the intended loads, environment and floor covering.

PowerFence: For Solid Boundary Fencing

PowerFence is a modular fencing system made from 75 mm reinforced AAC panels. The panels are installed between steel posts using the specified PowerFence brackets.

It provides a solid alternative to open-style fencing, with applications in residential properties and low-rise multi-residential developments. Its rendered finish can also complement the appearance of a home's external walls.

Choosing the Right Hebel Panel System

Choosing the right Hebel system depends on where the panels will be used and the requirements of the application. Each product is designed for a specific purpose, from external wall construction and internal separation to flooring and fencing.

Before selecting a system, consider these product-specific requirements:

Key consideration What to check
Intended application Match the product to the project, whether it involves external walls, internal separation, flooring or fencing.
Support and installation Check the required framing, joists, steel posts, brackets, connections, adhesives and fasteners for the selected system.
Finishes and exposure Consider the specified render, floor coverings, moisture protection, waterproofing and external exposure conditions.
Building requirements Confirm the applicable structural, fire, acoustic and thermal requirements for the complete building assembly.
Technical documentation Refer to the current Hebel installation guides, product specifications and approved engineering details to ensure the system is suitable for the project.

Selecting the correct Hebel panel from the beginning helps ensure the system is appropriate for its intended application and can be installed in accordance with the manufacturer's requirements.

For detailed product specifications and installation information, consult the manufacturer's technical resources before selecting or installing a system.

Building With the Right Hebel System

Hebel provides purpose-designed solutions for different construction applications, from external wall cladding and intertenancy walls to flooring and fencing. Choosing the appropriate product at the planning stage helps align the panel system with the building design and installation requirements.

Rather than treating all AAC panels as the same product, builders should consider the specific application and select the Hebel system developed for it. Always confirm the final specification against current manufacturer documentation and project-specific engineering requirements.

Get the Suitable Hebel Products for Your Next Project

Planning an external wall, intertenancy system, upper-storey floor or boundary fence? ATS Building Products supplies a range of Hebel products to support residential, multi-residential and commercial construction projects across Australia.

Explore the Hebel range at ATS Building Products or contact the ATS team to discuss your project requirements.

Previous article AAC Panels in Australian Construction
Next article Shop ATS Building Products Online or on the App